DIY wooden bench – Create an outdoor dining space

May 7, 2015

19246

Make outdoors fun with this simple DIY wooden bench.

FurnishYourself.com: Does your home/office have an attached balcony or a space as small as 5 ft X 9 ft which you don’t know how to utilize? We don’t want to crowd up the place with chairs and tables, so here’s a brilliant idea to convert that space into a comfortable area with a simple wooden bench. Use this simple DIY (Do it Yourself) design that only takes a couple of hours to make using basic tools and materials.

The bench dimensions are 56″ long x 16 1/4″ wide x 17 3/4″ high. This design can easily be customized to fit your space

Supplies needed:

6 x 1″ x 4″ x 6 ft pine boards (for bench top)

1 x 2″x 3″x 6 ft stud (Solid wood used for the legs)

Weather proofing stain or paint (Coffee color)

Decking screws (1 1/4″ (14 nos) , 2″ (8 nos))- Keep some extra screws handy

Wood Driller ( Holes can be drilled at the hardware store as well)

Step 1: Cut List

Cut the pine boards and stud to size

Tip: You can easily get this cut at the hardware store.

Frame (1″x4″): 2 x 55″, 3 x 13 3/4″

Top (1″x4″): 4 x 56″

Legs (2″x3″): 4 x 17″

Step 2: Paint the wood

First coat the wood with a semi-transparent weather proofing paint (Coffee color). Apply the second coat once the first coat is dry.

Step 3: Build the frame

Assemble the frame by first applying some glue on the ends of each frame item, then use corner clamps to hold the frame together as the glue does its job.

To further strengthen the frame, drill two pilot holes and put in screws (use 1 1/4″ screws). After the four sides are put together, add the middle piece (center across the length of the frame) for extra support.

Step 4: Attach the top

Take one of the top planks (1″ x 4″) and place it on top of the frame in such a way that it is 1/2″ past the edge of the frame at the ends and on the sides. Drill pilot holes and screw in place.

Screw in place the remaining pine boards, using a scrap piece of 1″ x 4″ as a spacer.

Step 5: Attach Legs

Affix the legs at its appropriate place (one leg to the inside of one corner of the frame and the other leg on the other corner) using clamps. Then drill pilot holes and screw in place (use 2″ screws here)